6 Insert the SD Memory Card.
1Push the Slot Cover to open it.
2Insert the SD Memory Card as illustrated. (Label side up).
7 Select “SD Card”.
zOnly one storage device can be selected at a time. When the “SD Card” is selected as a storage device, the scanned image cannot be saved to the PCMCIA/PC Card, or Hard Disk Drive at the same time.
8 Press the Start key.
Scanned image is saved in the following directory of the SD Memory Card.
zDirectory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
zThe data saved on the SD Memory Card
| can be printed by this machine or another |
| |
| Chapter | ||
| |||
| from SD Memory Card/PC in the Operating | ||
|
| ||
| Instructions (for Basic Operations). When |
| |
| printing PDF data, or |
| |
| data, install and set up the Memory Card |
| |
| Print Utility. For details, refer to the Help of |
| |
| the Memory Card Print Utility on the |
| |
9 | Document Management System | 2 | |
Push the SD Memory Card, and then | |||
| |||
| remove it. | Scan/Email | |
| zDo not remove the SD Memory Card while | ||
|
| ||
| the Access Indicator is flashing. | Operations | |
10 Close the Slot Cover. | |||
| |||
zWhen canceling the operation, press the Stop key on the Control Panel, and then select “Yes” on the Touch Panel Display.
11