6 Insert a PCMCIA/PC Card Adapter with a memory card.

Push on the slot cover to open it.

Insert a PCMCIA/PC card into the PCMCIA/ PC Card slot as illustrated. (Label side up)

7 Select “PC Card”.

zOnly one storage device can be selected at a time. When the “PC Card” is selected as a storage device, the scanned image cannot be saved to the SD Memory Card, or Hard Disk Drive at the same time.

8 Press the Start key.

The scanned image is saved into the PCMCIA/PC Card.

The scanned data is saved on the following directory of the memory card.

zDirectory:

\PRIVATE\MEIGROUP\PCC\DI\IMAGE

zThe data saved on the memory card in the PC Card Adapter can be printed by this machine or another DP-C354, DP-C264, DP-C323, DP-C263 or DP-C213. For more details, refer to Printing from SD Memory Card/PC in the Operating Instructions (for Basic Operations). When printing PDF data, or high-compression PDF data, install and set up the Memory Card Print Utility. For details, refer to the Help of the Memory Card Print Utility on the Document Management System CD-ROM.

9 Push the Eject button on the right side

of PCMCIA/PC Card slot, and then remove the PCMCIA/PC Card Adapter.

Eject button

zDo not remove the PCMCIA/PC Card while the Access Indicator is flashing.

10 Close the Slot Cover.

zWhen canceling the operation, press the Stop key on the Control Panel, and then select “Yes” on the Touch Panel Display.

Operations Scan/Email 2 Chapter

13