Settings Scanner 3 Chapter

Scanning Resolution

You can set the appropriate resolution according to your originals.

zThe standard setting of “Resolution” can be changed, refer to Scanner Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

zResolution settings are reset to their factory defaults when: -The Reset key is pressed.

-The Auto Reset Time interval has lapsed (default = 1 min). -The power is turned OFF.

-A scan job is completed.

1 Select a desired resolution, and then select “OK”.

zMost originals such as photos can be scanned without problems using the default resolution (200 dpi), and picture quality level (Full Color).

To scan smaller characters (8-point or smaller) clearly, increase the resolution or select Adjustment, and then select High Quality for Compression (Full Color). Since the file size increases with higher resolutions, the transfer time becomes longer depending on the specifications of the network, and the computer you are using.

Ex: The time required for transferring an A4 size color photo scanned at 600 dpi is three times as long as that for the same photo scanned at 200 dpi.

40