9 Select “Cc”, “Bcc” and/or “From”

address field, and follow the same procedures as in steps 7 and 8 if necessary.

zIf the Function Parameter “145 Sender Selection” (Fax/Email Settings> Fax Parameters) is set to “Valid”, you can preset up to 25 sender names. You can select from the sender list when sending an Email. However, if you select “From” on the Email screen, the sender list will not be displayed.

zFor more details on this setting, refer to Fax/ Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

10 Input the subject if necessary.

zDefault Subject is preset if “21 Default Subject” has been set in Function Parameters (Fax/Email Settings> User Parameters). For programming instructions, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

1Select “Subject”.

2Input a subject, and then select “OK”.

zUp to 40 characters.

zFor instructions on how to enter characters, refer to Using the Keyboard in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

11 Select “Close”.

12 Press the Start key.

Sending an Email with image file(s) attached.

13 Push the Eject button on the right side

of PCMCIA/PC Card Slot, and then remove the PCMCIA/PC Card Adapter.

zDo not remove the PCMPIA/PC Card Adapter while the Access Indicator is flashing.

14 Close the Slot Cover.

Operations Scan/Email 2 Chapter

31