First-time Operation
Getting Started
3 | 2 |
| |
| 1 |
4 Connect your computer to a power outlet
CAUTION
Be sure the AC adaptor is connected until completing Step 8 on page 11. 
When closing the cover, first insert the top of the cover. 
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed.
3
2
1
Power Indicator 
Power Switch 
5 Open the display
1Pull the carrying handle forward.
2Lift up the latch.
3Lift open the display.
NOTE
When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.
6 Turn your computer on
Rotate the power switch clockwise and hold it for approximately one second until the power indicator turns on before releasing it.
CAUTION
Do not rotate the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.
10
