Panasonic CF-28 Series operating instructions Create Backup Disks for Reinstallation, Eject Button

Create BACKUP Disks for Reinstallation

When [You do not need to make “BACKUP DISK”] is displayed (procedure 2 below), there is no need to create a BACKUP DISK. If this message is not displayed, create backup disks for reinstallation. To create backup disks, the floppy disk drive and format- ted 2HD floppy disks are needed.

1Make sure a disk is not in the write-protected state and set it.

2 Windows 2000

Select [Start] - [Programs] - [Panasonic] - [Cre-
ate Backup Disk] and follow the on-screen in-
structions.
Windows XP
Select [Start] - [All Programs] - [Panasonic] -
[Create Backup Disk] and follow the on-screen
instructions.
3 Place a label identifying the contents on each	Eject Button
disk.	Label-side up
	Insert the shutter-side
	headfirst.

Names of created BACKUP DISK

FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the disk by following the on-screen instructions.)

CAUTION

Store the floppy disks in a safe place. They will enable you to return your com- puter to factory default settings should any problems occur.

When creating backup disks and the message [Insufficient files to copy] is dis- played, select [OK] and then contact Panasonic Technical Support.

While the MP indicator () is on, do not remove the floppy disk, power down

your computer or enter either the standby or hibernation mode ( “Standby/ Hibernation Functions”).

When creating backup disks, do not run any other application program.

Be sure to create the backup disk.

If a backup disk is not created, it will be impossible to return the computer to its original state. In this case, contact Panasonic Technical Support.

Getting Started

13