Touch Pad (Basic Operation)

Work Surface

Use the touch pad to move the cursor on the display and perform normal computer operations.

For instructions on how to operate, refer to "Touch Pad (Advanced)".

NOTE

The touch pad has been designed to work only when a finger is used. Therefore, do not use other implement on the touch pad.

Right Button Left Button

Function

Touch Pad Operation

 

Moving the Cursor

Move the tip of your finger lightly over

 

 

the surface.

 

Tapping/Clicking

 

 

 

or

 

 

tapping

clicking

 

 

Double-Tapping/

 

 

Double-Clicking

or

 

 

 

 

double-tapping

double-clicking

Dragging

or

 

Two quick taps, but on the sec-

While holding down the but-

ond tap leaving your finger

ton, moving your finger on

down (applying pressure) and

the work surface.

moving it on the work surface.

 

Operation

Handling the Touch Pad

If a key combination such as Fn + F5 is used while the pad is being touched, the function of the key combination will not work. In addition, it is possible that control of the cursor will be lost and the cursor will not show proper movements. In such cases, the

computer has to be restarted by using the keyboard (e.g., ).

Do not place any object on the work surface or press down forcefully with sharp-pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pen).

Do not allow things that could dirty the touch pad, such as oil. The cursor may not work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene, thinner, or disinfectant-type alcohol.

17

Page 17
Image 17
Panasonic CF-28 Series Touch Pad Basic Operation, Work Surface, Move the tip of your finger lightly over, Dragging