First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of some basic
1 Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, contact Panasonic Technical Support.
AC Adaptor | 1 AC Cord | 1 Battery Pack | 1 |
Model No : |
| Model No : |
Modem Telephone Cable | 1 Strap | .......................................... 1 |
( | Page 28) |
|
|
Operating Instructions (This book) | 1 |
Windows® Book | 1 |
Product Recovery | 2 * |
* Dual OS : 4
Getting Started
Cover
2
1
1
Latch
Label-side up
3 
4
5
5
<Only for Models with touchscreen>
Soft Cloth | 1 | Stylus | 1 |
|
|
|
|
(
“Touchscreen”)
2 Read the LIMITED USE LICENSE AGREEMENT (
page 26) Before removing the seal covering the power switch, read the LIMITED USE LICENSE AGREEMENT.
3 Insert the battery pack
1Turn your computer over, and slide the latches inward.
2Lift open the cover holding both sides and remove the cover.
3Insert the battery pack into the computer with the
CAUTION
Be sure the battery pack is properly connected to the connector.
Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly.
4Put the cover back into place holding both sides.
5Slide the latches outward.
CAUTION
If the cover is not attached properly, the battery may fall out while the com- puter is being carried.
When attaching the cover, be careful not to get your fingers and the tab caught in the cover.
9
