Starting Up/Shutting Down
Operation
Starting Up
3 
2
1
Power Indicator 
Power Switch 
1 Open the display
1Pull the carrying handle forward.
2Lift up the latch.
3Lift open the display.
2 Turn your computer on
Rotate the power switch clockwise and hold it for approximately one second until the power indicator turns on before releasing it.
CAUTION
Under the condition that both the AC adaptor and the port replicator are not connected, the power will not go on if the display is closed.
After confirming that the power indicator has turned on, avoid the following until Windows has completed loading.
•Connecting or disconnecting the AC adaptor.
•Touching the power switch.
•Performing any keyboard, touch pad, touchscreen (only for models with touchscreen), or external mouse operations.
•Closing the display.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.
When the computer is turned on in a
When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
If security indicator (
) is displayed,
you must first enter your password (
“Security Measures”)
Upon entering your password* and pressing Enter .
If the correct password is input,
Will Start
Three incorrect attempts, or if no pass- word is entered for about a minute,
Will Not Start
(Power off)
*Supervisor Password or User Password set in the Setup Utility (not the Windows password).
When an application or file that was previously displayed ap- pears on your screen,
the standby or hibernation mode ( |
|
| “Standby/Hibernation Functions”) has |
|
| ||
been set. |
|
| |
14
