33
PC Card / ExpressCard
2

Open the cover and remove the card.

APress the eject button (F). The eject button pops out.
BPress the eject button (F) again so the card comes out of the slot.
CDraw the card straight out.
NOTE
zCheck the card’s specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal-
function may occur.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
zSome types of cards cannot be used simultaneously.
zAfter repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
zIf the computer freezes after resuming from standby or hibernation, remove and reinsert the card. If the problem per-
sists, restart the computer.
zWhen a card is inserted, power consumption increases. Remove the card when it is not in use, especially when oper-
ating by battery power.
zTo connect peripheral devices (SCSI, IEEE1394, etc.) using PC Card or an ExpressCard, follow the steps below (one
example).
AConnect the peripheral device to the card.
BTurn on the power of device.
CInsert the card until it surely fits in the slot.

A

B

C