37
SD Security
Inserting a specific SD Memory Card can work as an alternative to entering password in the cases below. Format the card
and make the necessary settings.
zStarting up the computer
zResuming the computer from standby, hibernation or screensaver
zLogging on to Windows
NOTE
zYou can start up the computer by entering the Supervisor Password or User Password when you do not use the SD
Memory Card.
zUse the formatted SD Memory Card (Îpage 34).
zThis function works only with the SD Memory Card slot. It does not work with other devices such as an SD card
reader/writer connected through USB port.
zYou cannot use this function together with the fingerprint security (optional).
zYou can use the setup SD Memory Card as an ordinary card on the computer and other devices.
zYou can use a single setup SD Memory Card for multiple computers. However, when using the card to log on to Win-
dows, you need to use the same logon user name and the same password on all of the computers.
Preparation
zTo start up the computer
Set the Supervisor Password in the Setup Utility (Îpage 8). (You can also set it during the configuration procedure.)
zTo use the card to log on to Windows or to resume from standby, hibernation or screensaver
Set the Windows logon user account and the password in [Control Panel] in advance. For further information, refer to
the Windows Help.
1Log on to Windows as an administrator.
2Insert the SD Memory Card in the SD Memory Card slot.
If [Secure Digital storage device] appears, click [Take no action], then click [OK].
3Start the SD Card Setup program.
Click [start] - [All Programs] - [Panasonic] - [SD Card Setup].
4Click [Next] in the Welcome screen.

SD Card Setup