35
SD Memory Card
CAUTION
zDo not remove or insert the SD Memory Card until Windows has completed loading.
zDo not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.
• While the computer is in standby or hibernation.
• While the SD Memory Card indicator is on.
• While data is being read from or written to the card.
• Immediately after the writing operation. The computer may still continue the access to the card just after writing
operation. If you remove the card before the operation is completed, the data may be damaged or the card access
may no longer be performed normally.
zNote that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages,
direct or indirect.
zDo not forcibly draw out the card or the dummy card, otherwise the slot may be damaged.
zInsert the card in the correct direction, otherwise the card and the slot may be damaged.
zAfter resuming from standby or hibernation, do not access the SD Memory Card for approximately 30 seconds.
To insert the card
1Insert the SD Memory Card with the label side facing up and with

the cut corner in front.

To remove the card
Preparation
zSave the data and close all applications.
zConfirm the SD Memory Card indicator (B) is off.
1Disable the card function.
ADouble-click on the notification area and click [Secure Digital Storage Device],
then click [Stop].
BFollow the on-screen instructions.
zThis step is not necessary when removing the card after turning off the computer.
Inserting/Removing the SD Memory Card