52
LAN
CAUTION
zDo not connect the telephone cable to the LAN port.
1
Turn off the computer.
zDo not use standby or hibernation.
2
Open the cover (A) and connect the cable.
Connect the LAN port (B) and the network system (server, HUB, etc.) using a LAN cable.
3
Turn on the computer.

To check the Local Area Connection status

AClick [start] - [Connect To] - [Show all connections].
NOTE
zWhen this function is enabled, power is consumed even the computer is in standby, hibernation, or powered off. Be
sure to use the AC adaptor.
zEven when a password is set in the Setup Utility and [Password on boot] is set to [Enable], entering the password is
unnecessary for turning on or resuming the computer.
zThis function is off under the following conditions:
• When you turn the computer off by pressing the power switch for four seconds or longer (e. g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
zThe screen remains dark after the computer resumes from standby. The previous screen display will be restored when
you touch the keyboard or touch pad.

Connecting LAN

Power On by LAN/Wake Up from LAN