53
LAN
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility
(Îpage 66).
2
In [Caution], press
Enter
.
3
Press
F10
, and then select [Yes] and press
Enter
.
4
Log on to Windows as an administrator.
5
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Network adapters] and double-click [Intel(R) 82566MM Gigabit Net-
work Connection], and then click [Advanced].
6
Click [Enable PME] in [Property] and select [Enabled] in [Value], and click [OK].
NOTE
zThe computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make the
setting by the following steps.
AClick [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] -
[Network adapters], and double-click [Intel(R) 82566MM Gigabit Network Connection], and then click [Advanced].
BClick [Wake on Link Settings] in [Property] and select [Disabled] in [Value], and click [OK].
zIf you forcibly shut down Windows, the Power ON by LAN function will not work.