54
LAN

Enabling/Disabling the Wake Up from LAN function

When the Wake Up from LAN function is enabled, the computer automatically resumes from standby or hibernation when the
computer is accessed from the network server via the internal LAN port. (Default setting)
The Wake Up from LAN function can be switched to enable/disable by performing the following procedure.
1
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Network adapters] and double-click [Intel(R) 82566MM Gigabit Net-
work Connection], and then click [Power Management].
2
Select the setting for [Allow the computer to turn off this device to save power.] and
[Allow this device to bring the computer out of standby.], and click [OK].
We recommend you to make the above two settings ON/OFF simultaneously.
NOTE
zThe computer may resume when another computer in the network makes unintentional access.
Using the following procedure, you can prevent accidental startup by unintentional access.
AClick [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] -
[Network adapters] and double-click [Intel(R) 82566MM Gigabit Network Connection], and then click [Power
Management].
BAdd a check mark for [Only allow management stations to bring the computer out of standby.], and click [OK].