8
Security Measures
Use these features to protect your data.
zOther security measures
• SD Security (Îpa ge 37)
• Embedded Security (TPM) (Îpage 67) : For further information, refer to the Installation Manual of “Trusted Platform
Module (TPM)”.
Set the Supervisor Password before setting the User Password.
1Start up the Setup Utility (Îpage 63).
2Select [Security].
3Select [Set Supervisor Password] or [Set User Password], and press
Enter
.
4Enter your password in [Enter New Password] and press
Enter
.
zWhen the password has been set, you need to enter your password in [Enter Current Password] and press
Enter
.
zTo disable the password, leave the input field empty and press
Enter
.
5Enter your password again in [Confirm New Password] and press
Enter
.
6In [Setup Notice], press
Enter
.
7Press
F10
, and then select [Yes] and press
Enter
.
CAUTION
zDo not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Con-
tact Panasonic Technical Support.
zWhen running the Setup Utility, do not leave and go away from your computer even for a short time, since other people
may set or change the password.
NOTE
zThe password will not be displayed on the screen.
zYou can use up to 32 alphanumeric characters (including spaces).
• The case (upper/lower) is ignored.
• Use only the upper horizontal row of numeric keys to input your password.
• You cannot use
Shift
and
Ctrl
to input a password.
zDisabling the Supervisor Password also disables the User Password.

Setting the Supervisor Password/User Password