Arranging the W-LAN L and R Cable
|
|
Attach the Tape to hold the Cable.
Pass the Cable through the notch and lead it downward.
Lead the Cable along the surface.
Attach the Tape to each of the Cables. (Avoid overlapping.)
Avoid overlapping of the Cables 
(all the way).
Pass the Cable through the notch. 
(Avoid running over the ribs.) 
Pass the Cable through the notch and lead it downward.
Pass the Cable between the boss and rib.
LCD Rear Cabnet
Pass the Cable through the notch. (Avoid running over the ribs.)
Attaching the LCD Damper C and LCD Damper D
1.Attach the four LCD Damper C to the upper part and lower part of the LCD Unit.
2.Attach the LCD Damper D to the upper center of the LCD Unit.
A |
|
LCD Damper D | 0~1mm |
Match the LCD Damper D to the center of the LCD Unit.
LCD Unit
A
LCD Display Side
0~1mm
LCD Damper C
LCD Rear Side
LCD Damper C
A
A: Match the LCD Damper C by LCD edge 0~2mm
