Arranging the TP Power Cable and Attaching the TP/LCD Sheet
Ensure the Tape does not cover the Connecter port.
Connect the Connector.
TP Power Cable
Ensure the Tape and Cable Sheet | 0~1mm |
|
| ||
| |||||
|
|
| |||
do not come out of the metal part. |
|
|
| ||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
0~2mm
0~2mm
Tape
Fold it back and attach to the side suface.
Pass the Cables over the Conductive Cloth.
Cable Sheet
| Corner of the Conductive Cloth. | |
| No protrusion. |
|
A B |
| Safety Working |
|
| |
S2
Safety Working
Arrange the Cable A and B
coming out of the Connector S1 part in the same length.
Setting the Inverter and Arranging the Inverter Cable
1.Insert the Inverter to the Inverter Case, and connect the Inverter Cable to the Connector on the Inverter.
2.Fix the Connector of the Inverter Cable using the Tape.
Attach the Inverter on the
Inverter
Case
Match the end of the Inverter to the mark. 
Tape
S5
Safety Critical components
Inverter
1.Avoid any kink, twist or stress on the components.
2.Do not reuse the Inverter once you removed it from the Inverter Case.
Inverter Case
S2
S2
Safety Working | Inverter Cable |
Pass the Cables through the notch.
Pass the Cable between the LCD and the Inverter Case.
Match the end of the Inverter Case to the end.
Fit the surplus length under the LCD.
Safety Working
Ensure the Cables do not come over the "a" line. (Otherwise they push up the front surface.)
"a" line
|
|
| Tape | S2 | |
0~1mm | |||||
Fold it back and fix it. | |||||
|
|
|
| ||
Safety Working
Ensure the portion with the Black Tape stays on the outlet.
