17
Standby and Hibernation Functions
zIt may take 1 or 2 minutes to enter standby or hibernation.
In standby or hibernation
zDo not attach or remove a peripheral device (including the Cradle). Doing so may cause malfunction.
zPower is consumed in standby. When power is exhausted, the data retained in memory will be lost. Connect the A C
adaptor when using the standby function.

To resume from standby or hibernation

1Press the power switch(A).
CAUTION
zDo not perform the following operations until resuming is complete. After the dis play is resumed, wait approximately
30 seconds (normally) or 60 seconds (when the computer is on a network ).
• Touch the screen, hardware buttons or power switch.
• Use an external mouse or other peripheral devices.
• Connec t or disconnect the AC adaptor.
• Shut do wn or restart Windows.
• Enter s tandby or hibernation (Wait approximately 1 minute).
• Set to or remove from the Cradle.
NOTE
zAfter resuming from standby or hibernation, the message “TosBtMng has stopped working” may appear.
Click [Close program].
If Bluetooth connections are cut off, click [start] - [All Programs] - [Bluetooth] - [Bluetooth Settings], and connect to the
Bluetooth devices again.
A