25
Battery Power
Computer behavior with low battery
The default settings are as follows.
zThis computer automatically switches from Battery 1 to Battery 2 and vice versa when either remaining battery change
becomes less than 10%. When both batteries are not sufficiently charged, the comp uter operates as below.
When the battery level becomes 10%
[Low battery alarm]
When the battery level becomes 5%
[Critical battery alarm]
zDisplays a message that the battery level is low. zThe computer enters hibernation.
↓↓
Charge the battery. Connect the AC adaptor or replace the battery to start up
the computer.
zConnect the AC adaptor immediately. If you do not
have the AC adaptor, close the application and turn off
the computer, then confirm that the power indicator is
off.
zIf you have a fully charged spare battery, turn off the
computer, replace the battery and turn the computer on
again.
zConnect the AC adaptor and charge the battery.
zIf you have a fully charged spare battery, replace the
battery and turn the computer on again.
Do not resume from hibernation until the battery is
charged or replaced.