19
Security Measures
Use these features to protect your data.
Set the Supervisor Password before setting the User Password.
Preparation
zSet the computer to the Cradle and connect an external keyboard to the Cradle.
1Start up the Setup Utility (Î page 53).
2Select [Security].
3Select [Set Supervisor Password] or [Set User Password], and press (Enter).
4Enter your password in [Enter New Password] and press (Enter).
zWhen the password has been set, you need to enter your password in [Enter Current Password] and pr ess
(Enter).
zTo disable the password, leave the input field empty and press (Enter ).
5Enter your password again in [Confirm New Password] and press (Enter).
6In [Setup Notice], press (Ente r).
7Press
F10
, and then select [Yes] and press (Enter).
CAUTION
zDo not forget your password. If you forget your Supervisor Password, you will not be able to u se your computer. Con-
tact Panasonic Technical Support.
zWhen running the Setup Utility, do not leave and go away from your computer even for a short time, si nce other people
may set or change the password.
NOTE
zThe password will not be displayed on the screen.
zYou can use up to 32 alphanumeric characters (including spaces).
• The case ( upper/lower) is ignored.
• Use onl y the upper horizontal row of numeric keys to input your password.
• You cannot use
Shift
and
Ctrl
to input a password.
zDisabling the Supervisor Password also disables the User Password.

Setting the Supervisor Password/User Password