
62
Hardware Diagnostics
4Press
F10
.
At the confirmation message, select [Yes] and press (Enter).
The computer will restart.
5Press and hold
Ctrl
+
F7
while [Panasonic] boot screen is displayed.
When the PC-Diagnostic Utility starts up, it will automatically begin the diagno stic check for all hardware compo-
nents.
zIf the password is requested, enter the password.
zDo not touch the screen.
zThe keyboard cannot be used until alternating blue and yellow colors are displayed on the left side of the hard-
ware icon (A).
zBy clicking the icon, you can execute the following operations:
• : Start the diagnostic check from the beginning
• : Stop the diagnostic check (You cannot restart the check partway through by clicking )
• : Display help (click the screen or press
Space
to return to the original diagnostic check screen)
zYou can check the status of the diagnostic check by the display color on the left side of the hardwa re icon
(A).
• Aqua : Not running diagnostic check
• Alternating blue and yellow: Currently running diagnostic check. The i nterval of the alternating colors
differs depending on the type of diagnostic check currently running.
During memory diagnostic check, the display may freeze for a long period of time. Wait until the process is
complete.
• Green : No problems discovered
• Red: P roblems discovered
NOTE
zUsing the following procedure, you can run a diagnostic check on a specifie d hardware component, or run an
extended diagnostic check on the memory or the hard disk (The extended dia gnostic check is only for the memory
and the hard disk). The extended diagnostic check is more detailed, and so requi res a longer period of time to run.
AClick to stop the diagnostic check.
BClick the icon for the hardware that is not to be checked, so that the icon is di splayed in gray (B).
When running a check on the memory or the hard disk, clicking the icon once will turn on the
extended diagnostic check (“FULL” (C) will be displayed below the icon ); click again, and the icon
will be displayed in gray (D).
CClick to start the diagnostic check.
A
B
e.g. hard disk
C
D