Panasonic CF-U1GQGTG2M appendix Message, and press

Troubleshooting (Basic)

Troubleshooting

Display

During Simultane-	Simultaneous display cannot be used until Windows
ous display, one of	startup is complete (during Setup Utility, etc.).
the screens be-
comes disordered.	When using the Extended Desktop, use the same
	display colors for the external display as those used by
	the LCD.
	If you continue to experience problems, try changing
	the display.
	Right-click on the desktop, and click [Graphics Proper-
	ties] - [Display Devices].
	If the [Command Prompt] is displayed in full-screen,
	reduce the display size.
The external display	If the external display does not support the power
does not work	saving function, it may not work normally when the
normally.	computer enters the power saving mode. Turn off the
	external display.
	When simultaneous display is activated, press				+
When the computer	(	) to switch the display.
starts up, simultane-
ous display be-
comes active.
	Operate the following steps.
<Only for model	A Set [GPS] to [Disabled] in the [Advanced - Serial
with GPS>		Port Configuration] of the Setup Utility.
The cursor cannot	B Press + (F10) and select [Yes] at the confirma-
be controlled prop-		tion		(Enter).
			message, and press
erly.		The computer will restart.

CLog on to Windows as an administrator.

D Click (Start) and input “c:\util\drivers\gps\GPS. reg” in [Search programs and files], and press (Enter).

EClick [Yes], click [Yes] and click [OK]. Then Restart the Computer.

FPress + (F2) while [Panasonic] boot screen is displayed.

GSet [GPS] to [Enabled] in the [Advanced - Serial Port Configuration].

HPress + (F10) and select [Yes] at the confirma-

tion message, and press (Enter).

44