Using the Software
Installing Easy Media Creator
To install the software application, follow the procedure below.
CAUTION
1 GB of free space on the hard disk is needed to install all the components of “Easy Media Creator.”
Close all other software application before running the Setup program for “Easy Media Creator.”
Log on to Windows as an administrator.
ENOTE
Depending on the computer, preparatory steps may be necessary before installa- tion. Before installing the application, be sure to read the Operating Instructions or Reference Manual of the computer.
1Log on to Windows as an administrator.
2Set “DVD Drive Utility Disc” in the drive.
3Windows Vista
At the [AutoPlay] message, click [Run SETUPUTIL.EXE] - [Continue]. [Utility Setup tool] screen will appear (allow some time for disc recognition). When the setup
program will not run automatically, click 
(Start) and input [x:\setuputil.exe]*1 in [Start Search], and press ENTER, and then click [Continue].
Windows XP
At the confirmation message, click [OK].
[Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*1 in [start] - [Run] and click [OK].
*1 “x” is the drive letter. You can change the letter to suit your preference.
4Click [Easy Media Creator Setup].
5Windows Vista
Click [Next] at the welcome message.
Windows XP
Select your language at [Choose Setup Language], then click [OK]. Follow the
During the installation, you will be required to agree the License Agreement. After reading the agreement, click [I accept the terms in the license agreement], then click [Next].
6Click [Finish].
7A message appears advising that the computer must be restarted. Click [Yes].
14
