Panasonic CF-W4 Series manual Exit Menu, Boot Menu

Setup Utility

zTo move a device from [Excluded from boot order] to [Boot priority order] (or vice versa):

Select the device using the Ï or Ð key,

and press the X key. The device you have moved will appear at the end of the list when moving a device from [Excluded from boot order] to [Boot priority order]. Set the boot order as required.

Getting Started

NOTE

zWhen starting up from the internal DVD-ROM & CD-R/RW drive, confirm the following settings.

•[CD/DVD Drive Power] is [On] in the [Main] menu.

•[Legacy USB Support] is [Enable] in the [Advanced] menu.

The computer cannot be booted from the DVD-ROM & CD-R/RW drive if the above settings are [Off] or [Disable].

zWhen starting up from a device connected by a USB port

• Check to make sure that [Legacy USB Support] is [Enable] in the [Advanced] menu.

zThe [Boot] menu cannot be changed when the Setup Utility is started up with the User Password.

zIf more than one of the same device is connected, only one device name will be displayed.

zBoot Menu

The device for starting up the operating system can also be selected during computer start-up. After the computer is turned on and the Esc key is pressed at [Panasonic] boot screen, [Boot Menu] (the device selection screen) will appear. When the [Boot Menu] setting is changed, the selection screen display will also change. [Boot Menu] is displayed only when [Boot First Menu] in the [Security] menu is set to [Enable].

zThe computer cannot be booted from devices listed in [Excluded from boot order]. For this reason, the order of pri- ority cannot be changed in this list.

zBootable CD created using the B’s Recorder in the CF-W2 and CF-Y2 series cannot be used on this computer. If you want to share bootable CD with those series, create a new bootable CD.

zThis computer does not support startup operations from CD/DVD drives other than the internal DVD-ROM & CD- R/RW drive.

Exit Menu

Save Values & Exit	Exit the Setup Utility and save your changes to CMOS.
Exit Without Saving Changes	Exit the Setup Utility without saving your changes to CMOS.
Get Default Values	Set the Setup Utility to the default settings.
	• This item is not displayed when starting up the Setup Utility with the User Password.
Load Previous Values	Load previous values from CMOS for all Setup items.
Save Current Values	Save your changes to CMOS.

34