Panasonic CU-C18KKS, CU-C24KKS, CS-C18KKS dimensions •Airflow direction Horizontal, Vertical Control

•Airflow direction (Horizontal, Vertical) Control

o During any operation mode combines with Patrol operation, airflow direction follows respective operation mode.

o During Patrol individual operation if e-ion starts, only Auto Air Swing is allowed. Even if “Air Swing” button is pressed, no signal is sent to air conditioner, and no change on LCD display.

o During Patrol individual operation if e-ion stops, Airflow direction louver closed.

•LED display (Applicable to all models except KKD models) o When Patrol operation is selected, Patrol LED illuminates.

o During Patrol individual operation, only Patrol LED illuminates. When e-ion air purifying operation starts based on dirtiness level, Power LED, Patrol LED and e-ion LED illuminates.

				PATROL LED		E-ION	TIMER
No	Description		BLUE	ORANGE	RED	BLUE	ORANGE
1	When patrol function is not selected		OFF	OFF	OFF	-	-
2	During gas sensor error detection control		OFF	OFF	Blinking	OFF	OFF
3	During E-ion abnormal discharge error		OFF	OFF	OFF	Blinking	OFF
4	During E-ion breakdown error		OFF	OFF	OFF	Blinking	Blinking
5	During Test Mode		OFF	OFF	OFF	OFF	OFF
6	During stop		OFF	OFF	OFF	OFF	OFF
7	2 minutes gas sensor initial stabilization time (Level 0)		ON	OFF	OFF	OFF	OFF
		a. Dirtiness level 0*	ON	OFF	OFF	OFF	OFF
8	During operation	b. Dirtiness level 1	OFF	ON	OFF	OFF	OFF
	During patrol	c. Dirtiness level 1*	OFF	ON	OFF	ON	OFF
		d. Dirtiness level 2	OFF	OFF	ON	ON	OFF

•Remote Control Receiving Sound

o	Normal Operation	Î Patrol Mode	: Beep
o	Patrol Mode	Î Stop	: Long Beep
o	Patrol Mode	Î Normal Operation	: Beep
o	Stop	Î Patrol	: Beep

•Timer Control

o When ON timer activates when unit stops, previous operation resumes and restored last saved Patrol operation status.

o When ON timer activates during any operation, no change and carry on current operation.

o When OFF timer activates during any operation, all operation stops and the latest Patrol operation status is saved.

•Power Failure Control

o During Patrol individual operation, if power failure occurs, after power resumes, Patrol individual operation resumes immediately.

o During combination operation, if power failure occurs, after power resumes combination operation resume immediately.

40