Panasonic CU-C18KKS Remote Control Button, 14.2.1SET Button, 14.2.2CLOCK Button, 14.2.4TIMER

14.2 Remote Control Button

14.2.1SET Button

•To check current remote control transmission code and store the transmission code to EEPROM: o Press “Set” button for more than 10 seconds

o Press “Timer Set” button until a “beep” sound is heard as confirmation of transmission code change.

•To change the air quality sensor:

o Press and release by using pointer

o Press the Timer Decrement button to select sensitivity:

1.Low sensitivity

2.Standard (Default)

3.Hi sensitivity

oConfirm setting by pressing Timer Set button, a “beep” sound will be heard. LCD returns to original display

after 2 seconds.

oLCD returns to original display if remote control does not operate for 30 seconds.

14.2.2CLOCK Button

•To change the remote control time format: o Press for more than 5 seconds

14.2.3RESET (RC) Button

•To clear and restore the remote control setting to factory default. o Press once to clear the memory

14.2.4TIMER ▲

•To change indoor unit indicators’ intensity: o Press continuously for 5 seconds.

14.2.5TIMER ▼

•To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F) o Press continuously for 10 seconds.

52