7-3-3. Remove the ceiling panel.
(1)Open the clamp (4 locations) and remove the 2 lead wires from the clamps. (Fig. 6)
(2)Remove the 4 screws fixing the corner cover (at 3 locations) and indicator cover (at 1 location). (Fig. 6)
(3)Press the center 1 of the cover and remove the cover with the section 2 pulled down. (Fig. 7)
(4)Remove the strap (3 locations) from the hook on the ceiling panel. (Fig. 8)
NOTE There is no strap on the indicator cover.
(5) Remove the bolt (4 locations) with a washer and remove the ceiling panel. (Fig. 9)
ScrewClamp
Indicator cover
Corner cover
Lead wire Pull down section 2.
Clamp
Cover
Center 1
Corner cover |
| Corner cover |
Screw | Fig.6 | Fig.7 |
Bolt
Strap
Remove the strap from the hook.
Bolt
Fig.8 | Fig.9 |
41
