Panasonic CY-TUN153U warranty Electrical Connections, Module CY-EM100U

English	Electrical Connections
		Wiring Diagram
25

Caution

This unit is designed for use in a car having a 12 V negative ground battery system.

To prevent damage to the unit, be sure to follow the connection diagram.

Do not insert the power connector into the unit until the wiring is completed.

Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent cable terminals from touching any metal parts.

Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may clear the memory.

Run the cords avoiding the spots where the temperature can be extremely high.

Fit a vinyl cap over unused connection terminals, to prevent contact with metal parts etc.

English

This unit cannot be operated alone.

This unit is designed for users to connect one or more system devices to Panasonic car 26 audio/AV unit at the same time.

Connecting with Head Unit (CQ-VD7003U) and Expansion

Module (CY-EM100U)

Head Unit:

CQ-VD7003U

TV Tuner: CY-TUN153U

TV Antenna

RCA cord (option)

 Power connector

Refer to page 24 for the TV antenna connection.

Not used.

Video (Yellow)

(Fuse 3 A)

Power Control Lead (Blue/white stripe)

To the external amplifier control power lead of the Head Unit.

To ACC power, 12 V DC, if the Head Unit has no external amplifier control power lead.

Ground Lead (Black)

To a clean, bare metallic part of the car chassis.

Battery Lead (Yellow)

To the car battery, continuous 12 V DC.

Head Unit/Expansion Module Connecting Cable To one of the system-up connectors (input)

TV Tuner:

CY-TUN153U

Head Unit/Expansion Module Connecting

Cable (supplied with CY-EM100U)

Video (Yellow)

 RCA cord

Video input

Port 1 IN to 4 IN System-up connectors (input)

Video input

Parking Brake (Side Brake) Connection Lead (Bright green)

TO EXPANSION MODULE

Expansion Module:

CY-EM100U

VIDEO	REMOTE IN
(Yellow)	Not used.

Note:

Strip about 5 mm of the lead ends for connection.

Be sure to fully plug in the connectors. Secure them with clamps and tapes.

All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or your dealer if other methods are required.

Be sure to wire the parking brake (side brake) for safety and preventing accidents.

If the Expansion Module (CY-EM100U, option) is not connected and the ACC is not mounted on the vehicle:

Connect the power control lead of this unit to the external amplifier control power lead of the Head Unit. If this connection is not made, the battery will run down.

Note:

Refer to individual instruction and installation manuals for each device for detailed installation and wiring.

Connect this unit to the Expansion Module (CY- EM100U, option) with the Head Unit/Expansion Module Connecting Cable and RCA cord (video) (supplied).

When the device that provides video output is connected to the System-up Connector, connect the video cable to input connector below the port to which the System-up Connector is connected.

Note for the Head Unit remote control unit (page 13):

With some Head Units, the Head Unit remote control unit may not have buttons intended specifically for TV operation, so some operations cannot be used for TV operation. But that does not mean that the tuner or the Head Unit are malfunctioning.

26 CY-TUN153U CY-TUN153U 27