Panasonic CY-TUN153U warranty Diver Diversity Antenna Setting, To use the two TV antennae Provided

English	Diversity TV Antenna
		Diversity TV Antenna:	Note:
		Of the two antennae connected to the system, the one	If there is no alternative but to use only one optional TV
11
			antenna, the diversity function has no effect.
		with the best reception is automatically selected for TV
			1. The way to plug the antennae varies with the number
		reception. Turning DIVER (Diversity) setting to “ON”
			of antenna terminals.
		reduces noise.
		To make effective use of this diversity function:	How to plug the antennae in when there is only one
			antenna terminal.
		 Connect both two TV antennae provided.

Turn DIVER (Diversity) setting to “ON”. Note:

 If only one is connected, the diversity function has no effect.

Recommended System and Operation English

We recommend using this TV tuner with the Panasonic Head Unit below.

For details on the head unit and head unit remote control operations, refer to the operating instructions for the Head Unit. 12

Head Unit with Touch Panel Control (CQ-VD7003U, CQ-VD6503U),

Expansion Module (CY-EM100U) and TV Tuner

Use the Head Unit touch panel to operate the TV tuner.

For details on the touch panel and remote control operations, refer to the chapter on TV operations in the operating instructions for the Head Unit.

Expansion Module Connection

To use the two TV antennae

provided

Plug the four terminals for the two antennae into the tuner. Combine the tuner TV terminals and the antenna terminals as shown on page 26.

Make sure the DIVER (Diversity) setting is “ON”.

How to plug the antennae in when there are two terminals.

(Connection is possible even without an Expansion Module Connection.)

TV tuner

TV tuner remote control unit:	Head Unit remote control unit:
Use this remote control unit	This remote control unit enables you to
for TV tuner setup operations	adjust the volume, switch sources, change

To use the two optional antennae

Two antennae must be prepared.

Plug the four terminals for the two antennae into the tuner. Combine the tuner TV terminals and the antenna terminals as shown on page 26.

How to plug the antennae in when there is only one antenna terminal.

Make sure the DIVER (Diversity) setting is “ON”.

2. Make sure the DIVER (Diversity) setting is “OFF”.

DIVER (Diversity)

Antenna Setting

Confirm “ON” to receive a good reception. Default: ON

Setting: ON/OFF

Press [PWR] (Power).  Press [MENU].

(DIVER (Diversity) Antenna	TV channels, and configure the auto preset
Setting).	memory setting.

Press [] or [] to select “ON” or “OFF”.

Press [ENT] (ENTER) or [MENU] to set and return to the previous display.

For connection configurations other than the recommended connection configurations above, refer to the following pages.

Head Unit (CQ-VD7001U): Page 30

Rear Monitor (CY-VHD9401U): Page 31

The remote control units supplied with the Head Unit and Rear Monitor cannot be used for TV tuner operations. (Except for adjusting the volume, switching sources, etc.)

Combination of this TV tuner with the non-Panasonic Head Unit (in-car audio system with a monitor/AV unit): It will not be possible to operate this TV tuner with a remote control unit, or that of the non-Panasonic Head Unit.

12 CY-TUN153U CY-TUN153U 13