English | Basic TV Operation |
|
Channel Preset
English
Refer to the
17instruction manuals for information on TV operation on the
[PWR] (Power) | [ENT] (ENTER) |
[BAND] 
[MENU]
[] (CH DOWN) 
[] (CH UP)
[] []
(PRESET)
Power
Turn your car’s ignition key to the ACC or ON position. ON: Press [PWR] (Power).
OFF: Press [PWR] (Power) again.
Note:
When changing the source to TV tuner on Head Unit
Band Selection
Press [BAND].
TV1 
TV2
Note:
TV2 is provided to allow more preset channels in memory.
Warning
To ensure safety, never attempt to preset channels while you are driving.
Up to 12 channels can be stored in each of the TV1 and TV2 band selections.
TV2 is provided to allow more preset channels in memory. Channels that could not be placed in memory on the Band TV1 can be placed on the Band TV2.
If Band TV1 is sufficient to hold all desired channels, they should usually be preset to that band.
Note:
New channels overwrite existing saved stations after these procedures.
Auto Preset Channel Memory
Writing Preset Channel (PRESET
WRITE)
Favorite channels can be written after you have set the preset channel once.
Example:
The 25 channel is written in the TV1 preset channel list.
Press and hold [] (PRESET) for more than 2 seconds.
Preset channel writing mode display appears.
Press [] (CH DOWN) or [] (CH UP) to select channel you want to write.
18
Channel Selection
Press [] (CH DOWN) or [] (CH UP).
[] (CH UP): Higher channel number
[] (CH DOWN): Lower channel number
Press and hold [] (CH DOWN) or [] (CH UP) for more than 0.5 seconds, then release it. Seeking will start.
TV Channel Display
Press [ENT] (ENTER).
Press [ENT] (ENTER) again to display off.
Example: When preset channel is not set.
TV band | Selected TV channel number |
With this operation, channels with good receiving conditions can be automatically stored in the preset memory.
Press [BAND] to select the TV band.
Press and hold [BAND] for more than 2 seconds.
12 channels with first to 12th highest in signal strength will be preset to each band. (They are listed in order, from the earliest channel number.)
Preset Channel Calling
Press [BAND] to select the TV band.
Press [] or [] (PRESET).
TV channel you want to write
Press [ENT] (ENTER) or [BAND] to set.
Press [MENU] to exit the preset channel writing mode.
Deleting Preset Channel (PRESET
DELETE)
Channels can also be deleted from the presets when no longer required.
Example:
The 30 channel is deleted in the TV1 preset channel list.
Press and hold [] (PRESET) for more than 2 seconds.
Preset channel deleting mode display appears and preset 1 channel is received.
Press [] or [] (PRESET) to select preset channel you want to delete.
Note:
Only English is displayed on the OSD screen.
Background of the display becomes blue when the unit cannot get a good reception on the TV.
Selected preset channel number
Preset channel you want to delete
Press [ENT] (ENTER) or [BAND] to set.
Press [MENU] to exit the preset channel deleting mode.
18 |
|
| 19 | ||
|
|
|
|
|
|
