Panasonic DMC-FZ10PP Removing the Battery, Slide the lock 1 to remove the battery

Models: DMC-FZ10PP

1 144
Download 144 pages 9.35 Kb
Page 15
Image 15

Preparation

Removing the Battery

Preparation

Check that the camera is turned off and that the lens is retracted.

Close the flash.

1 Slide the lever to open the card/

3 Close the card/battery door.

battery door.

 

MEMORY CARD/

BATTERY

OPEN

2Slide the lock 1 to remove the battery.

¬Suggestions/Tips ¬

If you will not use the camera for a long time, remove the battery.

After the fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for max. 3 months after the battery was removed, in accordance with the elapsed time after the battery is inserted. (The time may be shorter if the battery is not charged sufficiently.) If more than 3 months has passed, the clock setting will be lost. In this case, set the clock again. (P22)

Do not open the card/battery door during the access to the card.

The supplied battery is designed only for this camera. Do not use it with any other equipment.

15

Page 15
Image 15
Panasonic DMC-FZ10PP operating instructions Removing the Battery, Slide the lock 1 to remove the battery