Preparation
Attaching the Strap
11 Pressing both sides of the cover,
2Pull out the black strap holder completely.
3Pass the metal fitting through the eyelet of the camera.
4Rotate the black strap holder in the opposite direction until it clicks.
2Detach the black strap holder from the metal fitting.
5Slide the cover until it is attached firmly.
•When the black strap holder is completely detached, attach it again as above.
•Attach the strap to the other side of the camera being careful not to twist it.
•Attach the strap so that you can see “Panasonic” logo.
•Check that the strap is firmly attached to the camera.
20
