Recording
- 124 -
Adjusting the picture quality
1Press 2/1 to select the type of Photo Style.
2Press 3/4 to select the items, and then press 2/1 to adjust.
Registered settings are memorized even if the camera is turned off.
If you adjust the picture quality, [_] is displayed beside the Photo Style icon on the
screen.
Selecting [MONOCHROME] will change the color tone through [SATURATION].
Picture quality cannot be adjusted in the Intelligent Auto Mode and the Scene Mode.
3Press 4 to select [Custom setting] and then press [MENU/SET].
Confirmation screen is displayed. It is executed when [YES] is selected.
Setting can be registered in [CUSTOM].
Note
In Photo Style, the camera may do something equivalent to pull pro c essi ng or pus h proces sing
to create a picture with particular characteristics. The shutter speed may become very slow at
this time.
This allows you to select the aspect ratio of the pictures to suit printing or the playback
method.
Applicable modes:
Note
The ends of the recorded pictures may be cut at printing so check before printing. (P205)
Item Effect
[CONTRAST] [r]Increases the difference between the brightness and the
darkness in the picture.
[s]Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS] [r]The picture is sharply defined.
[s]The picture is softly focused.
[SAT URATI ON] [r]The colors in the picture become vivid.
[s]The colors in the picture become natural.
[NOISE
REDUCTION]
[r]The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
[ASPECT RATIO]
[X][ASPECT RATIO] of a 4:3 TV
[Y][ASPECT RATIO] of a 35mm film camera
[W][ASPECT RATIO] of a high-definition TV, etc.
[] Square aspect ratio
S