Recording
- 72 -
Recording Mode:
Taking Pictures using the Built-in Flash
Note
Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
Set the built-in flash to match the recording.
Open the flash.
1Select [FLASH] in the [REC] Mode menu. (P56)
2Press 3/4 to select a mode and press [MENU/SET].
Exit the menu after it is set.
ATo open the flash
BTo close the flash
Be sure to close the flash when not in use.
The flash setting is fixed to [Œ] while the flash
is closed.
Slide the flash open
lever. Press the flash until
it clicks.

Switching to the appropriate flash setting