Recording
- 76 -
Recording Mode:
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.

Press the rear dial to switch to Exposure Compensation operation.

Rotate the rear dial to compensate the exposure.

AExposure Compensation value
B[EXPO.METER]
•The Exposure Compensation value can be set within a range
of j5 EV to i5 EV. When recording motion pictures, the Ex posure Compensation
value can be set within a range of j3EV to i3EV.
•Select [0] to return to the origin al exposure.
•Rotate the rear dial to display the [EXPO.METER]. (P138) (Howe ver, it does not appear
in ¿/ Mode.)
Note
•When the exposure value is out of the j3EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actua l brig ht ness of
the recorded image in the Auto Review or playback screen.
•The set exposure value is memorized even if the camera is turned off.
•The compensation range of the exposure will be limited depending on the brightness of the
subject.
•When the aperture and shutter speed values are displayed in the screen in the Program AE
Mode, Program Shift operation and Exposure Compensation operat i on is switched every time
the rear dial is pressed.
•In the Aperture-Priority AE Mode, Aperture Setting operation (P102) and Exposure
Compensation operation is switched every time the rear dial is pressed.
•In the Shutter-Priority AE Mode, Shutter Speed Set ting operation (P102) and Exposure
Compensation operation is switched every time the rear dial is pressed.
Underexposed Properly
exposed Overexposed
Compensate the exposure
towards positive. Compensate the exposure
towards negative.
A B