Playback/Editing
- 152 -
You can stamp the recording date/time, name, location, travel date or title onto the
recorded pictures.
1Select [TEXT STAMP] on the [PLAYBACK] Mode menu. (P56)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
Collective editing in a group unit is possible by selecting a picture with burst icon [˜].
For [SINGLE IN BURST GROUP] and [MULTIIN BURST GROUP], refer to P146.
4Press 3/4 to select [SET], and then press [MENU/SET].
5Press 3/4 to select text stamp items, and then press [MENU/SET].
[TEXT STAMP]
3Select the picture, and then press
[MENU/SET] to set.
[] appears on screen if the picture is
stamped with text.
[MULTI] setting
Select the picture with 3/4/2/1 and
set (repeat) by pressing [MENU/SET],
then press 2 a few times to select [OK],
and execute by pressing [MENU/SET].
The setting is canceled when
[MENU/SET] is pressed again.
[SINGLE] [MULTI]
Press 2/1 to select
the picture. Press 3/4/2/1 to
select the pictures.