- 121 -
Recording
Auto Registration
When [AUTO REGISTRATION] is set to [ON], the registration screen will display
automatically after taking a picture of a face that has a high number of appearances.
Registration screen is displayed after approximately 3 pictures.
It may be extremely hard to recognize only with [AUTOREGISTRATION], so register the face
images with [FACERECOG.] in the [REC] Mode menu beforehand.
Registering from the automatic registration screen
1Press 3 to select [YES] and then press [MENU/SET].
If there are no registered persons, proceed to step 3.
Selection screen is displayed again when [NO] is selected, and when [YES] is selected
with 3, [AUTO REGISTRATION] will be set to [OFF].
2Press 3/4 to select [NEW PERSON] or [ADDITIONAL IMAGE] and then press
[MENU/SET].
After additionally registering or changing a face image, the screen returns automat icall y to
the recording screen.
3Perform the operation in Step 5 and following in “Registering face image of new
person”.
Note
If the registration screen will not display, it may display easier by recording in the same
conditions or with the same expressions.
If the registration screen is displayed for a person that is already registered, it will make the
recognition easier by additionally registering.
It may make recognition harder when a picture recorded with flash is registered.
Item Description of settings
[NEW PERSON] A list of registered people is displayed when there are 6 people
already registered. Select the person to be replaced.
[ADDITIONAL IMAGE]
To additionally register a face image for a registered person.
Press 3/4/2/1 to select the person to whom you wish
add the picture, and then press [MENU/SET].
If 3 images have already been registered, the picture
replacement screen will appear. In this case, select the picture
you wish to replace.