Recording
- 80 -
Changing the settings for [ / SETTINGS], [STEP] and [SEQUENCE] in Auto
Bracket
1Select [AUTO BRACKET] in the [REC] Mode menu. (P56)
2Press 3/4 to select [ / SETTINGS], [STEP] or
[SEQUENCE] and then press [MENU/SET].
3Press 3/4 to select the setting and then press [MENU/SET].
You can take one picture at a time when set to [ ].
You can continuously take pictures up to set numbers when set to [ ].
Exit the menu after it is set.
Note
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
The exposure may be compensated incorrectly, depending on the brightness of the subject.
When taking pictures continuously using Auto Bracket with [I.RESOLUTION] set to
[EXTENDED], it may take time to record all the set number of pictures.
Auto Bracket setting is fixed to [ ], [3•2/3] and [0/`/_] in the Intelligent Auto Mode.
When the flash is activated, you can take only 1picture.
Auto Bracket is disabled when White Balance Bracket is set.
The Auto Bracket will be disabled during recording of the motion pictures.
Item Settings Item Settings
[ / SETTINGS] [ ] (single) [SEQUENCE] [0/`/_]
[] (burst) [`/0/_]
[STEP]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)