Connecting to other equipment
- 178 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s LCD monitor.
Some printers can print directly from the card removed from the camera. For details, refer to
the operating instructions of your printer.
AUSB connection cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
BAlign the marks, and insert.
Use a battery with sufficient battery power or the AC ada pto r (o ptiona l). If t he rema inin g ba ttery
power becomes low while the camera and the printer are connected, the status indicator blinks
and the alarm beeps. If this happens during printing, stop printing at once. If not printing,
disconnect the USB connection cable.

Connect the camera to a printer via the USB connection cable A

(supplied).

When the camera is connected to the printer, the cable disconne ct prohibit icon [å]
appears. Do not disconnect the USB cable while [å] is displayed.

Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].

Note
Do not use any other USB connection cables except the supplied one. Use of cab les other t han
the supplied USB connection cable may cause malfunction.
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
Before inserting or removing a car d, turn the camera off, and disconnect th e USB connection
cable.
Motion pictures recorded cannot be printed out.
Preparations: Turn on the camera and the printer.
Perform the print quality and other settings at the printer before printing the
pictures.