- 151 -
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [TEXT STAMP] (P152).
1Select [TITLE EDIT] on the [PLAYBACK] Mode menu. (P56)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
Collective editing in a group unit is possible by selecting a picture with burst icon [˜].
For [SINGLE IN BURST GROUP] and [MULTIIN BURST GROUP], refer to P146.
4Enter the text. (P122)
Exit the menu after it is set.
Note
To delete the title, erase all the text in the text input screen.
You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
You can set up to 100 pictures at one time with [MULTI].
Title editing is disabled during the following conditions:
Motion pictures
Pictures taken with [ ], [ ] or [ ]
Pictures recorded with other equipment
[TITLE EDIT]
3Select the picture, and then press
[MENU/SET] to set.
[] is displayed for pictures with titles
already registered.
[MULTI] setting
Select the picture with 3/4/2/1 and
set (repeat) by pressing [MENU/SET],
then press 2 a few times to select [OK],
and execute by pressing [MENU/SET].
The setting is canceled when
[MENU/SET] is pressed again.
[SINGLE] [MULTI]
Press 2/1 to select
the picture. Press 3/4/2/1 to
select the pictures.