Advanced (Playback)
105
VQT1F83
Single setting
1Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2Press [MENU/SET] twice to close
the menu.
Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P103 to 104)
•If you press [MENU/SE T] while canceling
protection, the canceling will stop halfway.
•The protect setting may not be e ffective
on other equipment.
•If you want to delete protected pictures,
cancel their protection.
•Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted.
•Even if you do not protect pictures on an
SD Memory Card or an SDHC Memory
Card, they cannot be deleted when the
card’s Write-Protect switch B is set to
[LOCK].
•The following functions cannot be used
with protected pictures.
–[ROTATE]
–[AUDIODUB.]
–[TITLE EDIT]
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P93)
You can add the audio after taking a
picture.
1Press 2/1 to select the picture and then press 4 to start audio recording.
•The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press 3 to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
•Audio dubbing cannot be used with the
following pictures.
–Motion pictures
–Protected pictures
–Pictures recor ded when the quality is
set to [RAW] or [RAWiJPEG]
2Press 4 to stop recording.
•The audio recording stops
automatically if 4 is not pressed after
about 10 seconds.
3Press [MENU/SET] twice to close
the menu.
[SET] The protect icon [ ] A
appears.
[CANCEL] The protect icon [ ] A
disappears.
A
2
[AUDIO DUB.]
Adding audio after taking pictures
MENU
SET
DMC-FZ18ENG.book 105 ページ 2007年7月18日 水曜日 午後5時32分