Panasonic DMCFZ18, DMCFZ18K Inserting and Removing the Card (optional)/the Battery

Preparation
15
VQT1F83
Inserting and
Removing the Card
(optional)/the Battery
•Check that this unit is turned off.
•Close the flash.
•Prepare a card. (optional)
•You can record or play back pictures
on the built-in memory when you are
not using a card.
1Slide the card/battery door to
open it.
•Always use genuine Panasonic
batteries (CGR-S006A).
•If you use other batteries, we cannot
guarantee the quality of this product.
2Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever A in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
•Do not touch the connect ion terminals
of the card.
•The card may be damaged if it is not
fully inserted.
31:
Close the card/battery door.
2:
Slide the card/battery door to the
end and then close it firmly.
•If the card/battery door cannot be
completely closed, remove the card,
check its direction and then insert it
again.
•Remove the battery after use.
•Do not remove the battery with the
camera turned on since the settings on
the camera may not be stored properly.
•The supplied battery is designed only
for the camera. Do not use it with any
other equipment.
•Do not insert or remove the battery or
the card while this unit is turned on.
The data on the built-in memory or the
card may be damaged. Be particularly
careful while the built-in memory or the
card is being accessed. (P24)
•We recommend using a Panasonic
card.
DMC-FZ18ENG.book 15 ページ ２００７年７月１８日 水曜日 午後５時３２分