Panasonic DMCFZ18K operating instructions 112, Folder Composition

Connecting to other equipment

•If you use “Windows 98/98SE/Me”, download “QuickTime 6.5.2 for Windows” from the following site, and install it. http://www.apple.com/support/downloads/ quicktime652forwindows.html

•This software is installed as standard on a “Macintosh OS”.

∫Folder Composition

Folders are displayed as shown in the following illustration.

≥Built-in memory	DCIM
≥Card					100_PANA
	1
		100_PANA
				P1000001.JPG
			2			3
				P1000002.JPG
				P1000999.JPG
		101_PANA
		999_PANA
	MISC
	PRIVATE1

1Folder number

2File number

3 JPG:	Pictures
MOV:	Motion pictures
RAW:	Pictures in RAW files
MISC:	DPOF print
	Favorite
	Category slide show
PRIVATE1:	Pictures recorded in
	flip animation function

•The data for up to 999 pictures recorded by the camera can be included in 1 folder. If the number of pictures exceeds 999, another folder is created.

•To reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu.

112

∫Conditions under which a different folder number is used

In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number.

1When the folder just recorded to

contains a picture file with the number 999 in it (example: P1000999.JPG).

2When the card just recorded to contains, for example, a folder with the number 100 [100_PANA] in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with

XXXXXbeing the name of the maker) and then a picture is recorded.

3When recording after selecting [NO.RESET] from the [SETUP] menu. (Pictures will be recorded to a new folder with a number sequential to the folder recorded to immediately before. By using [NO.RESET] on a card that does not contain folders or pictures, such as one just formatted, the folder number can be reset to 100.)

∫About the PTP connection If the OS is “Windows XP”, “Windows Vista” or “Mac OS X”, you can

connect in PTP mode if you set the camera

to [ ] mode and then connect to your PC.

• Pictures can only be read on the camera. They cannot be written to a card or deleted.

• When there are 1000 or more pictures on a card, the pictures may not be imported.

•Do not use any other USB connection cables except the supplied one.

•Do not disconnect the USB connection cable while [ACCESS] is displayed.

•When there are many pictures on the built-in memory or the card, it may take some time to transfer them.

•You may not be able to play back motion pictures on the built-in memory or the card

VQT1F83