Basic
35
VQT1F83
3Press 2/1 to select the picture and then press 4 to set.
(Only when selecting [MULTIDEL ETE])
•Repeat the above procedure.
•[ ] appears on the selected pictures. If
4 is pressed again, the setting is
canceled.
•The icon [ ] blinks red if the selected
picture is protected and cannot be
deleted. Cancel the protect setting and
then delete the picture. (P104)
4Press [ ].5Press 3 to select [YES] and then press [MENU/SET] to set.
(Screen when selecting
[MULTIDELETE])
•When you delete pictures, only pictures
in either of the built-in memory or the
card can be deleted. (You cannot delete
pictures in both the built-in memory and
the card at the same time.)
•[DELETE ALL PICTURES ON THE
BUILT-IN MEMORY?] or
[DELETE ALL PICTURES
ON THE MEMORYCARD?] is
displayed when using [ALL DELETE]
and [DELETE ALL EXCEPT ?] is
displayed when using
[ALL DELETE EXCEPT ].
•If you press [MENU/SET] while deleting
pictures using [ALL DELETE] or
[ALL DELETE EXCEPT ], the
deleting will stop halfway.
•Do not turn off the camera while deleting.
•When deleting pictures, use a battery with
sufficient battery power or the AC adaptor
(DMW-AC7PP; optional).
•It is possible to delete up to 50 pictures a t
one time using [MULTIDELETE].
•The greater the number of pict ures the
longer it takes to delete them.
•If there are pictures that are protected
[ ] (P104), do not conform to the DCF
standard or are in a card with the
Write-Protect switch slid to the [LOCK]
side, they are not deleted even if
[ALL DELETE] or
[ALL DELETE EXCEPT ] is selected.
MENU
SET
DMC-FZ18ENG.book 35 ページ ２００７年７月１８日　水曜日　午後５時３２分