Preparation
11
VQT1F83
•Attach the strap to the other side of the
camera being careful not to twist it.
•Check that the strap is firmly attached to
the camera.
•Attach the strap so that the “LUMIX” LOGO
is on the outside.
•We recommend attaching the strap when
using the camera to prevent it from
dropping.
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood
will minimize lens flare and ghosting. The
lens hood cuts off excess lighting and
improves the picture quality.
•Check that the camera is turned off.
•Close the flash.
1Securely attach the hood adap tor
(supplied) so that it is all the way
into the lens barr el.
•Do not tighten the hood adapt or too
much.
2Place the camera upside down,
align the mark on the lens hood
with the mark A on the camera
and then insert the lens hood.
•Make sure the screw is loose and then
attach the lens hood.
3Tighten the screw.
•Do not tighten the screw too much.
∫Removing the hood adaptor
•Grasp the base of the hood adaptor to
remove it.
DMC-FZ18ENG.book 11 ページ ２００７年７月１８日　水曜日　午後５時３２分