Others

[MEMORY CARD ERROR FORMAT THIS CARD?]

The card format cannot be recognized by the camera. Format the card again with the camera after saving necessary data on a PC etc. (P110)

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]

This message appears when the camera did not operate properly because force was applied to the lens by a hand or other object, or the hood adaptor is not securely attached. Turn the camera off and on. If the message is still displayed, contact the dealer or your nearest Service Center.

[MEMORY CARD PARAMETER ERROR] Use a card compatible with this unit. (P5, 16)

•You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.

[MEMORY CARD ERROR PLEASE CHECK THE CARD]

•An error has occurred accessing the card. Insert the card again.

[READ ERROR

PLEASE CHECK THE CARD]

An error has occurred reading the data. Insert the card again. Make sure the card is inserted properly and then play back again.

[WRITE ERROR

PLEASE CHECK THE CARD]

An error has occurred writing the data. Turn the camera off and remove the card. Insert the card again and turn the camera on. Make sure the camera is turned off before removing or inserting the card to avoid damage.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]

•When you set the picture quality to [30fpsVGA] or [30fps16:9], we recommend using a High Speed SD Memory Card with “10MB/s” or greater displayed on the package.

124

•Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording may stop in the middle.

[A FOLDER CANNOT BE CREATED]

A folder cannot be created because there are no remaining folder numbers that can be used. (P112)

Format the card after saving necessary data on a PC etc. (P110)

If you execute [NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100. (P22)

[PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV]

•The AV cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once.

•Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P23)

•This message also appears when the USB connection cable is connected to the camera only.

In this case, connect the other end of the USB connection cable to a PC or a printer. (P111, 113)

[PLEASE RE-CONNECT THE PRINTER.] This message will be displayed if you change the mode dial to print mode [ ], while this unit is connected to a PC. If connecting the printer again, change the mode to a mode other than [ ] and then check that no data is being transferred. ([ACCESS] appears on the LCD monitor while data is being transferred.)

[USB MODE CHANGED. PLEASE REMOVE THE USB CABLE.]

This message will be displayed if you change the mode dial to a mode other than print mode [ ] while this unit and the printer are connected.

Set the mode dial to [ ] again and then disconnect the USB connection cable. If printing, stop the printing and then disconnect the USB connection cable.

[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]

The printer cannot print. Check the printer.

VQT1F83

Page 123 Page 125
Page 124
Image 124
Panasonic DMCFZ18K operating instructions 124
Page 123 Page 125

DMCFZ18, DMCFZ18K specifications

The Panasonic DMC-FZ18K and DMC-FZ18 are advanced digital cameras known for their impressive blend of versatility and user-friendly features. Released by Panasonic as part of their Lumix series, these models have become popular among both amateur photographers and enthusiasts looking to capture high-quality images without the complexities of professional-grade DSLRs.

One of the standout features of the DMC-FZ18 is its powerful 18x optical zoom lens. This lens provides a focal length equivalent to 28mm to 504mm in 35mm terms, allowing for remarkable flexibility in capturing subjects from wide-angle landscapes to distant wildlife. This extensive zoom range is complemented by the Intelligent Image Stabilization technology that helps to reduce the effects of camera shake, ensuring sharp and clear images even at full zoom.

The FZ18 is equipped with a 8.1-megapixel sensor that delivers high-resolution images with excellent detail. This sensor is paired with Panasonic's advanced image processing technology, which enhances the overall image quality and ensures vibrant colors and contrast. The camera also features a variety of shooting modes, including Intelligent Auto, which allows for quick and easy adjustments to settings like exposure and focus. This mode is particularly useful for photographers who want to capture great shots without manually adjusting every setting.

Another notable technology in the DMC-FZ18 is its Venus Engine 3, which enhances image processing speed and performance. This engine allows for quick burst shooting, making it easier to capture fast-moving subjects. Additionally, the camera features a high-resolution, tiltable LCD screen that provides flexibility in composing shots from different angles while also making it easy to review images.

The Panasonic DMC-FZ18K and DMC-FZ18 are designed with user comfort in mind, offering an ergonomic grip for better handling during prolonged use. With a focus on user experience, the cameras are equipped with a range of customizable settings, enabling photographers to tweak their shooting style to match their preferences.

Overall, the DMC-FZ18 and DMC-FZ18K models provide an excellent balance of advanced features, camera technology, and ease of use, making them a solid choice for anyone looking to explore the world of digital photography. With their impressive zoom capabilities, high-quality image output, and user-friendly interface, they remain relevant in the consumer camera market, catering to a wide array of photographic needs.
Top Page Image Contents