Connecting to other equipment

Note

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (optional).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

•Motion pictures recorded cannot be printed out.

Selecting a single picture and printing it

Press 2/1 to select the picture and then press [MENU/SET].

•The message disappears in about 2 seconds.

Press 3 to select [PRINT START] and then press [MENU/SET].

•Refer to P187 for the items which can be set before starting to print the pictures.

•Press [MENU/SET] to cancel printing halfway.

•Disconnect the USB connection cable after printing.

PictBridge

14

 

100-0001

PLEASE SELECT

THE PICTURE TO PRINT

MULTI PRINT

PRINT

SELECT

SINGLE SELECT

 

PRINT START

 

PRINT WITH DATE

OFF

NUM. OF PRINTS

1

PAPER SIZE

 

PAGE LAYOUT

 

CANCEL

SELECT

SET

- 185 -

Page 184 Page 186
Page 185
Image 185
Panasonic VQT2Y96 185, Selecting a single picture and printing it, Press 3 to select Print Start and then press MENU/SET
Page 184 Page 186
Top Page Image Contents