Panasonic DMCFZ40K, VQT2Y96 206, Taking pictures using Auto Bracket is not possible

Others

Taking pictures using Auto Bracket is not possible.

•Is the number of recordable pictures 2 or less?

The recorded picture looks rough.

Noise appears on the picture.

•Is the ISO sensitivity high or the shutter speed slow?

(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.)

>Decrease the ISO sensitivity. (P127)

>Increase the setting for [NOISE REDUCTION] in [PICT. ADJ.] or lower the setting for each of the items other than [NOISE REDUCTION]. (P140)

>Take pictures in bright places.

•Has [HIGH SENS.] or [HI-SPEED BURST] in the Scene Mode been set? If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction.

The brightness or the hue of the recorded picture is different from the actual scene.

•If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction.

- 206 -