Panasonic DMCFZ40K, VQT2Y96 Using the Protector/Filter optional, 192, Attach the filter

Others

Using the Protector/Filter (optional)

The MC protector (DMW-LMC52; optional) is a transparent filter which affects neither the colors nor the amount of light, so it can always be used to protect the camera’s lens. The ND filter (DMW-LND52; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the color balance. PL filter (DMW-LPL52; optional) will suppress the reflected light from a metal or non spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air), making it possible to take a picture with enhanced contrast.

Turn the camera on.

Rotate the zoom lever towards [L] (W), and set the lens barrel to Wide (1k).

•Set [CONVERSION] to [OFF]. (P144)

•Close the flash.

Attach the filter.

C

AMC protector B ND filter

C PL filter

Note

•Do not attach multiple filters at the same time.

•If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.

•You cannot attach the filter when the lens hood is attached.

•If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the camera.

•Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus may be adjusted to the lens, resulting in the subject being out of focus.

•Refer to the instructions for each filter for details.

- 192 -